Manual insertion is common for short runs and new SKUs. Desiccant starts working the moment it meets air, so handling matters as much as placement. Adapt this outline to your own quality system.
1. Storage
- Keep desiccant in its sealed supplier packaging until use
- Store in a cool, dry area, off the floor
- First in, first out, by lot
2. At the line
- Open only what the run needs in a short window
- Reseal partial packs right away with their original closure, or in a sealed bag
- Record the lot number on the batch record
3. Placement
| Pack | Placement |
|---|---|
| Bottle | On top of the fill or under the cap, after fill and before capping |
| Tub | Under the lid or on top of the fill, before the induction seal |
| Pouch | In the headspace, before sealing |
4. Checks
- One card per unit, verified at a set frequency or by check weigher
- Card printed side visible
- No cards in the powder
- Seal check after insertion
5. Records
- Desiccant lot per batch
- Opened time and remaining quantity
- Deviations, such as cards left exposed too long
Setting up manual insertion?
Ask about packaging formats that suit your run size. A real person will reply.
Or email info@atmosiscience.com
FAQ
How long can desiccant sit open on the line?
As short as practical. Open only what the run needs and reseal the rest.
Can I reuse cards left out overnight?
Treat them as a deviation and follow your quality system.
Where should the card go in a tub?
Under the lid or on top of the fill, before sealing.
Keep reading: Offering a desiccant option · Quoting desiccant cost · Card sizing





































